SNMP stands for Simple Network Management Protocol. It allows a manager to query information from an agent. A popular use of SNMP is to retrieve network interface counters to plot a bandwidth graph. While the “S” in SNMP stands for simple, SNMP can be quite difficult to deal with. However, it is still the de facto standard for retrieving metrics in an heterogeneous environment. Net-SNMP is a suite of SNMP applications including an agent. Out of the box, this agent exports a lot of information but if something is missing, there are several ways to extend it. Which ones?

tl;dr: in my opinion, extending Net-SNMP should be done with either of those methods:

  • using extend directive;
  • using pass_persist directive;
  • using AgentX protocol.

SNMP in a nutshell§

The variables accessible with SNMP through the agent are organized in a tree. Each variable is typed and associated to an object identifier (or OID). For example, . is the OID of the name of the second network card.

Usually, SNMP is operated over UDP, port 161. For the purpose of this article, we consider a manager can issue three kinds of requests:

retrieve a variable.
retrieve the next variable, in lexical order of their OID. This operation enables an SNMP manager to walk through all available variables, for example to discover the list of interfaces of an agent. This operation is what makes an SNMP agent difficult to implement but this is also a critical feature.
request the modification of a variable.

Since such an OID may be difficult to handle by humans, available variables are described by a MIB module which is a file that should be parsed to get a mapping between OID and variable names and types. For example, the above OID can also be referred as IF-MIB::ifName.2. Those MIB modules are described using a subset of ASN.1 defined in RFC 2578.

A MIB module allows to group several variables into a conceptual table. For example, IF-MIB::ifDescr, IF-MIB::ifType, IF-MIB::ifSpeed are columns of IF-MIB::ifTable. Each row is associated to an index. In the case of IF-MIB::ifTable, it is the interface index. Net-SNMP includes snmptable allowing one to display such a table in a natural manner1:

$ snmptable localhost IF-MIB::ifTable
SNMP table: IF-MIB::ifTable

 ifIndex ifDescr           ifType ifMtu   ifSpeed
       1      lo softwareLoopback 16436  10000000
       2    eth0   ethernetCsmacd  1500 100000000
       3    eth1   ethernetCsmacd  1500  10000000
       4     br0   ethernetCsmacd  1500         0

Variables inside a table are called columnar objects while those outside are scalar objects. SNMP, as a protocol, does not care of this distinction since it does not know the concept of MIB modules.

Other useful tools from Net-SNMP includes snmpget to get a specific variable, snmpwalk to discover available variables (with GETNEXT operation) from an OID and snmptranslate to translate between object names and OID.

$ snmpget localhost IF-MIB::ifDescr.2
IF-MIB::ifDescr.2 = STRING: eth0
$ snmpwalk localhost IF-MIB::ifDescr
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: br0
$ snmpwalk -On public localhost .
. = STRING: lo
. = STRING: eth0
. = STRING: eth1
. = STRING: br0
$ snmptranslate -On IF-MIB::ifDescr.3

Extending Net-SNMP§

ethtool -S allows us to access various statistics from a network card, like the number of octets received and transmitted or the number of collisions. While some of those statistics are defined in IF-MIB, in RMON-MIB and in EtherLike-MIB, some of them are not available and very specific. Therefore, we would like to export those statistics, unmodified, through SNMP.

To the best of my knowledge, no MIB module exists for such an usage. The first task is to write one. It can be called ETHTOOL-MIB. It only contains one table indexed by the interface index and the name of the statistic. Here is the expected output:

$ snmpwalk localhost ETHTOOL-MIB::ethtoolStat.2
ethtoolStat.2.'align_errors' = Counter64: 0
ethtoolStat.2.'broadcast' = Counter64: 25
ethtoolStat.2.'multicast' = Counter64: 345
ethtoolStat.2.'rx_errors' = Counter64: 0
ethtoolStat.2.'rx_missed' = Counter64: 0
ethtoolStat.2.'rx_packets' = Counter64: 262011
ethtoolStat.2.'tx_aborted' = Counter64: 0
ethtoolStat.2.'tx_errors' = Counter64: 0
ethtoolStat.2.'tx_multi_collisions' = Counter64: 0
ethtoolStat.2.'tx_packets' = Counter64: 296170
ethtoolStat.2.'tx_single_collisions' = Counter64: 0
ethtoolStat.2.'tx_underrun' = Counter64: 0
ethtoolStat.2.'unicast' = Counter64: 261641

I have coded various implementations of this MIB module and made them available in a GitHub repository.

With arbitrary commands§

The extend directive allows the agent to execute an arbitrary command and to provide its output and status through NET-SNMP-EXTEND-MIB module. If we want to export the statistics for eth0, we could add something like this in snmpd.conf, using a custom script to format the output of ethtool -S in a way that is more suitable for our use:

# Export eth0 statistics
extend eth0-names  /full/path/to/ethtool-stats eth0 names
extend eth0-values /full/path/to/ethtool-stats eth0 values

The result can be retrieved through NET-SNMP-EXTEND-MIB::‌nsExtendOutput2Table:

$ snmpwalk localhost NET-SNMP-EXTEND-MIB::nsExtendOutput2Table
nsExtendOutLine."eth0-names".1 = STRING: tx_packets
nsExtendOutLine."eth0-names".2 = STRING: rx_packets
nsExtendOutLine."eth0-names".3 = STRING: tx_errors
nsExtendOutLine."eth0-names".4 = STRING: rx_errors
nsExtendOutLine."eth0-names".5 = STRING: rx_missed
nsExtendOutLine."eth0-names".6 = STRING: align_errors
nsExtendOutLine."eth0-names".7 = STRING: tx_single_collisions
nsExtendOutLine."eth0-names".8 = STRING: tx_multi_collisions
nsExtendOutLine."eth0-values".1 = STRING: 246309
nsExtendOutLine."eth0-values".2 = STRING: 223941
nsExtendOutLine."eth0-values".3 = STRING: 0
nsExtendOutLine."eth0-values".4 = STRING: 0
nsExtendOutLine."eth0-values".5 = STRING: 0
nsExtendOutLine."eth0-values".6 = STRING: 0
nsExtendOutLine."eth0-values".7 = STRING: 0
nsExtendOutLine."eth0-values".8 = STRING: 0

It is also possible to configure such a command using SET requests. For example, if we want to add statistics for eth2, we could issue the following command:

$ snmpset -m +NET-SNMP-EXTEND-MIB localhost \
>    'nsExtendStatus."eth2-names"'  = createAndGo \
>    'nsExtendCommand."eth2-names"' = /full/path/to/ethtool-stats \
>    'nsExtendArgs."eth2-names"'    = 'eth2 names' \
>    'nsExtendStatus."eth2-values"'  = createAndGo \
>    'nsExtendCommand."eth2-values"' = /full/path/to/ethtool-stats \
>    'nsExtendArgs."eth2-values"'    = 'eth2 values'
nsExtendStatus."eth2-names" = INTEGER: createAndGo(4)
nsExtendCommand."eth2-names" = STRING: /full/path/to/ethtool-stats
nsExtendArgs."eth2-names" = STRING: eth2 names
nsExtendStatus."eth2-values" = INTEGER: createAndGo(4)
nsExtendCommand."eth2-values" = STRING: /full/path/to/ethtool-stats
nsExtendArgs."eth2-values" = STRING: eth2 values
$ snmpgetnext -m +NET-SNMP-EXTEND-MIB localhost \
>    'nsExtendOutLine."eth2-names"'
nsExtendOutLine."eth2-names".1 = STRING: tx_packets

This can be very convenient but also a huge security risk. You should disable this functionality or enable it only for some SNMPv3 user.

Using extend does not allow to implement an arbitrary MIB module. If the cache is not disabled, extend is a good solution for various simple needs, like providing the content of a one-line file or the output of some Nagios plugin. However, exporting anything tabular, like interface statistics, is not a good fit.

With pass-through scripts§

Net-SNMP allows one to extend the agent by delegating some sub-tree to a script defined by the pass_persist directive. Such a script will receive requests on its standard input with a very simple line-oriented protocol described in the manual page of snmpd.conf. Here is an example of interaction:

→  get
→  .
←  .
←  counter64
←  223941
→  getnext
→  .
←  .
←  counter64
←  0

The protocol is simple enough to implement it from scratch in any scripting language. However, in Perl, you may prefer to use SNMP::‌ExtensionSNMP::‌PassPersist extension from Sébastien Aperghis-Tramoni. You can find the complete example on Github.

use SNMP::Extension::PassPersist;
my $extsnmp = SNMP::Extension::PassPersist->new(
    backend_collect => \&update_tree

sub update_tree {
    my @interfaces = </sys/class/net/*>;
    foreach my $interface (@interfaces) {
        $interface =~ s/^.*\///;
        open(ETHTOOL, "ethtool -S $interface 2>/dev/null |") or next;
        while (<ETHTOOL>) {
            /^\s+(\w+): (\d+)$/ or next;
            my $name  = $1;
            my $value = int($2);
            my $oid   = oid_compute($interface, $name);
            $extsnmp->add_oid_entry($oid, "counter", $value);

With Python, snmp-passpersist module, from Nicolas Agius, provides a similar interface. Look at the complete example on GitHub.

pass_persist allows you to implement an arbitrary MIB module with honest performances. Here are some important things to know about this directive:

  • Unless you have a recent version of Net-SNMP, 64bit types are converted to 32bit equivalents. The counters may overflow quickly.
  • While handling a request, you are not allowed to pause (for example, to fetch a remote information): the agent would become unresponsive. If you need slow-to-get data or data from the agent, grab them in a separate thread and ensure you have them beforehand.

With AgentX protocol§

AgentX is a protocol defined in RFC 2741 allowing a master agent to be extended by independent sub-agents. For snmpd to become a master agent, you just need to add master agentx in snmpd.conf. Here are some of the benefits of an AgentX sub-agent over pass_persist:

  1. No configuration is needed for the master agent to accept an additional sub-agent. A sub-agent registers to the master agent the MIB modules (or part of them) it wants to take care of.
  2. A sub-agent is decoupled from the master agent. It can run with a different identity or be integrated into another daemon to export its internal metrics, send traps or allow remote configuration through SNMP.
  3. AgentX protocol can be carried over TCP. Sub-agents can therefore run on a foreign host or in a jailed environment.
  4. 64bit types are fully supported. Traps are also supported.

Perl and Python§

Net-SNMP provides a Perl module, Net-SNMP::agent, to write a sub-agent using AgentX protocol. This module is not as convenient as the module for pass_persist described above since it does not provide a convenient layer to put required information into some datastore. Basically, it mimics the available C API. Here are a few examples of its use:

There is no similar binding for Python but there is an agentx extension using ctypes. It provides a more high-level view. I did not write an example for this one but you can look at the example provided by the author.

C with “new” API§

To write a sub-agent in C, you have to choose between two API:

  1. the API inherited from UCD-SNMP also known as the “traditional” API;
  2. the new API developed for Net-SNMP 5.x.

With both API, an handler is registered to take care of one or several sub-trees. With the traditional API, the handler is invoked with very little information. It is then up to you to locate the appropriate variable by mapping the index part of the OID to the objects you want to export. It is quite simple for scalar objects but columnar objects with complex indexes are a pain with such an API.

The new API provides various helpers. Some of them allow you to copy objects into an array or a list and let Net-SNMP library do the hard work of serving them. Another helper will provide methods to serve objects without putting them in a special structure but by providing an iterator. Some of those helpers can also help you to cache some variables.

On top of this new API, Net-SNMP comes with mib2c, a tool that will help you convert a MIB module into C code: after a few questions, you will get a skeleton C code you will have to complete with the logic to retrieve real objects. A generated file also provides directions on what to do (with some magic command to have a step-by-step cookbook).

I was able to implement ETHTOOL-MIB by just running it through mib2c, choosing the table container helper with cache and adding some code in ethtoolStatTable_data_access.c. You can look at the result on Github. Here is a stripped-down version2 of what has been modified:

/* Socket for ioctl */
skfd = socket(AF_INET, SOCK_DGRAM, 0);

/* Iterate through all interfaces */
for (ifa = ifap; ifa != NULL; ifa = ifa->ifa_next) {
    /* Grab statistics name and values */
    strcpy(ifr.ifr_name, ifa->ifa_name);
    drvinfo.cmd         = ETHTOOL_GDRVINFO;
    ifr.ifr_data        = (caddr_t) &drvinfo;
    ioctl(skfd, SIOCETHTOOL, &ifr);
    n_stats             = drvinfo.n_stats;
    strings->cmd        = ETHTOOL_GSTRINGS;
    strings->string_set = ETH_SS_STATS;
    strings->len        = n_stats;
    ifr.ifr_data        = (caddr_t) strings;
    ioctl(skfd, SIOCETHTOOL, &ifr);
    stats->cmd          = ETHTOOL_GSTATS;
    stats->n_stats      = n_stats;
    ifr.ifr_data        = (caddr_t) stats;
    ioctl(skfd, SIOCETHTOOL, &ifr);

    ifIndex = if_nametoindex(ifa->ifa_name);

    /* Iterate through statistics */
    for (i = 0; i < n_stats; i++) {

        /* Declare the appropriate index */
                (char *)&strings->data[i * ETH_GSTRING_LEN],
        ethtoolStatName[sizeof(ethtoolStatName) - 1] = '\0';
        ethtoolStatName_len = strlen(ethtoolStatName);

        /* Append this new variable to the container. */
        rowreq_ctx = ethtoolStatTable_allocate_rowreq_ctx();
                    ethtoolStatName, ethtoolStatName_len);
        rowreq_ctx->data.ethtoolStat.high = stats->data[i] >> 32;
        rowreq_ctx->data.ethtoolStat.low = (uint32_t)stats->data[i];

        CONTAINER_INSERT(container, rowreq_ctx);

See? It is pretty easy. I have only enumerated all the objects I wanted to expose. I didn’t even have to convert statistics names to an OID, mib2c built a ethtoolStatTable_indexes_set() for this purpose. OpenHPI project provides an extensive documentation to write a sub-agent this way.

Now, on the downside, to implement a single table, I have 14 generated files whose code style is usually unfit to integrate into an existing project : some people, me included, do not like automatically generated code, all the more when it is so verbose. The solution would be to use the new API without mib2c; unfortunately, while the documentation exists, all provided examples rely exclusively on mib2c tool. Unless you are able to grasp the new API without it, I would restrict its use to two cases:

  • Writing a new module for inclusion into Net-SNMP. Since most modules are now written with the help of mib2c, there is no coding style problem.
  • Writing a standalone sub-agent for some MIB. As a standalone project, you won’t run into coding style problems either.

For other uses, let’s have a look at the traditional API.

C with “traditional” API§

The traditional API is way simpler and even if it is quite old, it is easier to find associated examples. Here is how to initialize the agent, again, in a stripped-down version (the complete version is on GitHub):

static oid ethtool_oid[] = {1, 3, 6, 1, 4, 1, 39178, 100, 1};
static struct variable3 ethtool_vars[] = {
  {1, ASN_COUNTER64, RONLY, ethtool_stat, 3, {1, 1, 2}}

int main()
  REGISTER_MIB("ethtoolStatTable", ethtool_vars,
               variable3, ethtool_oid);
  while (1)

The REGISTER_MIB() macro is used to register the provided root OID (ethtool_oid) to the master agent. It also registers handlers associated to various sub-OID through the ethtool_vars[] array. Each member of this array features the following fields:

  • magic is an integer allowing one to discriminate OID handled by the same handler. For a table, this allows to handle several columns with the same handler since they share a common index.
  • type is the type of the variable that will be returned.
  • acl tells if the object is read-only (RONLY) or read-write (RWRITE).
  • findVar is the handler associated to the object. Its task will be to find the appropriate object and return its value.
  • The two last fields are the relative OID this entry is responsible for along with its length.

The prototype of ethtool_stat() handler function is the following:

static u_char*
ethtool_stat(struct variable *vp, oid *name, size_t *length,
             int exact, size_t *var_len, WriteMethod **write_method);

This function should return the value of the requested variable or NULL if no appropriate object was found. The value can be statically stored since it will be copied. Here is the description of the arguments:

  • struct variable *vp is the structure the handle was associated with, except that vp->name is now a full OID, not a relative one. You can access vp->magic to determine which column or which scalar to handle if this handler is common to several objects.
  • oid *name and size_t *length describe the OID requested. If you want to return another OID (for a GETNEXT request for example), you can modify them. name points to an OID array large enough to fit any OID you want to return.
  • int exact tells if the requested OID should be exactly matched (case of GET or SET) or not (GETNEXT).
  • size_t *var_len is used to tell the size of the returned object.
  • WriteMethod **write_method is only used if the variable is modifiable. When a SET request is received, the API will call the handler with exact set to 1 and expects to get a pointer to the function that will handle the write operation3.

To implement this function, you are on your own. When relying on externally fetched data, you need to handle a cache yourself. I have used a red-black tree for this purpose (with code stolen from OpenBSD). This also enables an easy implementation of the GETNEXT operation.

Here are three projects using this API to provide SNMP support:

  • Keepalived is a VRRP daemon and a monitoring daemon for LVS clusters. I have added a complete SNMP support. The most interesting files are core/snmp.c, check/check_snmp.c and vrrp/vrrp_snmp.c. It features a tight integration into Keepalived event loop that should be reusable by other projects. It includes read-only support of all data structures (configuration, state and statistics), ability to send traps on events and a write support for some values.
  • lldpd is an implementation of 802.1AB (LLDP) which is a protocol allowing an equipment to advertise itself to its neighbors on Ethernet level. 802.1AB comes with a huge MIB module and many extensions. lldpd provides a fairly complete read-only implementation of this MIB module. Some tables have complex indexes. Have a look at agent.c. There is currently no write support and no traps but lldpd features privilege separation and some code allows it to still use an Unix socket to speak with the master agent.
  • Asterisk, an open source PBX, includes an AgentX sub-agent allowing one to grab some metrics. Look at res/snmp/agent.c.

UPDATED: If it is critical for your project to not block, you should be aware that using Net-SNMP implementation of AgentX has some issues. Have a look at my other post on this topic.

Other solutions§

The manual page for snmpd.conf explores other ways to extend Net-SNMP agent under the section “Extending agent functionality“:

  • exec and sh are deprecated. Use extend instead.
  • pass is a bit simpler than pass_persist. The command is run once for each request. Such a command can easily be turned into a pass_persist script. Moreover, Net-SNMP will not answer any request while a pass command is running.
  • proxy redirects requests to another SNMP agent. Unless you have some code that can only act as a complete SNMP agent, it is better to use AgentX instead. For programs using Net-SNMP API, turning an agent into an AgentX sub-agent is just one line of code. Since a sub-agent involves less code than a complete agent, it is more efficient and more reliable.
  • smux has been superseeded by AgentX.
  • perl and dlmod allow one to load and execute external code inside the running agent. Unless you have important performance requirements, it is better to use a sub-agent instead: if some bug happens, only the sub-agent will be affected, not the master agent. A sub-agent sticks more closely to the Unix philosophy: “write programs that do one thing and do it well”. However, Net-SNMP FAQ says:

Implementing the module in C within the main agent (directly or via dlmod) is probably the most efficient and reliable, closely followed by embedded perl (or python) extensions. These have the advantage of minimal overheads between the code implementing the MIB module, and the agent framework, and no inter-process communication issues.

  1. Additional arguments for snmp* are usually required to specify a version and a community (for SNMPv1 and SNMPv2c) or a user (for SNMPv3). In all examples, I do not specify anything. I assume that ~/.snmp/snmp.conf contains the appropriate bits. Moreover, some outputs are truncated. 

  2. No allocations, no variable declarations and no error checkings. Do not do this at home! 

  3. If you want to look at an example of how to handle a SET request, look at the SNMP support for Keepalived. A SET operation is more complex because SNMP ensures that the SET operation is atomic across all provided variables. It uses a three-staged commit. The traditional API is very inefficient for this kind of operation because the object has to be located again for each step.