On June 8, 2011, will be World IPv6 Day. Major web companies like Google, Yahoo! and Facebook will serve their content through IPv6. While some of them already provide IPv6 content, you either need to use a special URL or get your connection from some selected providers, known to provide working IPv6 connection (the selection is done through DNS).
What’s World IPv6 Day about?🔗
World IPv6 Day is mostly about major content providers and network operators. End users are not expected to take any special actions. The content will be provided for one day on IPv6 and IPv4 without any special trick to circumvent broken IPv6 setup. If you have an IPv4 only connectivity, all will continue to work (this day is not about switching Internet to IPv6 only). If you have a working IPv6 connectivity of any kind, you will use it to access content. However, if you have a broken IPv6 connectivity, you will find yourself isolated during one day until you solve the problem. You can check your connectivity and determine if you will run into trouble on World IPv6 Day.
The main point of this day is to check if IPv6 native content can be provided to anybody without leaving out a large part of the users (the ones with a broken connectivity) which is reason why we don’t already have IPv6 native content everywhere. Google explains it this way:
We continuously conduct detailed measurements on the quality of IPv6 connectivity, and our latest results show that making Google services generally available over IPv6 at this time would lead to connection problems and increased latency for a small number of users. User experience is very important to us, and we do not want to impact users on networks that do not yet fully support IPv6. We will continue to re-evaluate the situation as the IPv6 Internet evolves.
While content provider are invited to provide IPv6 content, network operator are expected to troubleshoot their customers’ problem (and they cannot withdraw themselves from this operation since the main change is done by content providers). If they can enable IPv6 connectivity, that would be great too but this is not mandatory.
UPDATED (2011.06): It’s a shame but Microsoft’s participation to World IPv6
day is a “fix” to prefer IPv4 over IPv6. Moreover, this fix
will be reverted a few days later. Let’s hope that network operators
don’t follow the lead by not setting up DNS hijacking to remove
What can I do?🔗
Even if you are neither a network operator nor a major player in web content publishing, it is expected that World IPv6 Day will also be the playground for most IPv6 related things.
As a user🔗
Check if your ISP provides native IPv6 connectivity. This can be an opt-in option. For example, in France, Free allows its users to enable native IPv6 connectivity if they choose the appropriate option. That’s easy to do and you get IPv6 in a matter of minutes.
If your ISP does not provide native IPv6 connectivity, you can try to
bug them about this. This is unlikely to work. You can also get IPv6
through a tunnel broker like SixXS (create an account and
apt-get install aiccu) or Hurricane Electric. Wikipedia has a
list of IPv6 tunnel brokers. Don’t rely on any other
transition mechanism, they are unreliable.
As a service provider🔗
If you host yourself some services, like your web page or your own mail server, you can enable IPv6 connectivity for them as well. Get an IPv6 connectivity for your services, either native or through a tunnel broker.
Then, enable IPv6 on each service you provide. Check that they are
listening on IPv6 with
ss -6l. All the tips below are meant for very
simple setup. Ensure that
net.ipv6.bindv6only is set to 0. Here is
what I have done:
- Enable SSH access through IPv6. With the default configuration
of OpenSSH, this is already done. Check your
ListenAddressdirective if you have one.
- Serve Web content through IPv6. I am using Nginx as
a web server and you can mix IPv4 and IPv6 in the same virtual
host. Setting up IPv6 is easy. Ensure that IPv6 support is compiled
nginx -V) use
listen [::]:80instead of
listen 80. Apache is equally easy to configure and should even work out of the box since the
Listen 80directive will listen to both IPv4 and IPv6 by default. lighttpd also supports IPv6. An easy way to get started is to use
server.use-ipv6 = "enable".
- Enable IPv6 in Postfix, Dovecot, BIND. For all of
them, this works out of the box. Nowadays, most daemons will work
fine with IPv6 without any special configuration since they will
::by default which means “any IPv4 or IPv6 address” as long as
net.ipv6.bindv6onlyis set to 0. Unfortunately, there is still some daemons that do not support IPv6.
- Add appropriate
AAAArecord to your DNS because providing IPv6 services is of little use if your users (including you) cannot access them without typing the appropriate IP address. You may also want to provide a
NSrecord reachable through IPv6.
- Update your monitoring to use IPv6 as well. If you advertise IPv6 service and only IPv4 is working, most IPv6 client will be unable to access them.
- Adapt your firewall. In Linux, Netfilter handles IPv4 and IPv6 separately. You need to ensure you setup a correct firewall for IPv6 as you have done with IPv4.
Here is a minimal firewall that you can adapt:
ip6tables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT ip6tables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT for chain in INPUT OUTPUT; do ip6tables -A $chain -m rt --rt-type 0 -j DROP ip6tables -A $chain -p icmpv6 --icmpv6-type neighbor-solicitation \ -m hl --hl-eq 255 -j ACCEPT ip6tables -A $chain -p icmpv6 --icmpv6-type neighbor-advertisement \ -m hl --hl-eq 255 -j ACCEPT ip6tables -A $chain -m state --state NEW \ -p icmpv6 --icmpv6-type echo-request -j ACCEPT done ip6tables -A INPUT -i lo -j ACCEPT ip6tables -A OUTPUT -o lo -j ACCEPT # Put your rules here! ip6tables -N REJECT_ALL ip6tables -A REJECT_ALL -p tcp -j REJECT --reject-with tcp-reset ip6tables -A REJECT_ALL -p udp -j REJECT --reject-with icmp6-adm-prohibited ip6tables -A REJECT_ALL -j DROP for chain in INPUT OUTPUT FORWARD; do ip6tables -A $chain -j LOG --log-prefix "$chain-reject: " ip6tables -A $chain -j REJECT_ALL done
There is still a long way for full IPv6 support of all applications in Debian but it is a release goal since Etch. This is not an easy task since adding IPv6 support on some software can be really difficult. DSA also enabled IPv6 support on many servers used by the Debian project including the main web server, the main mirror, the security mirror and the name servers. You should be able to use Debian with an IPv6 only access.